466 MULTIMEDIA
Customer Programmable Features — Uconnect 3
Settings
Uconnect 3 With 5-inch Display Buttons On The Touch-
screen And Buttons On The Faceplate
Push the Settings button on the touchscreen to display the
settings menu screen. In this mode the Uconnect system
allows you to access all of the available programmable
features.
NOTE:
Only one touchscreen area may be selected at a time.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired mode,
press and release the preferred setting and make your selec-
tion. Once the setting is complete, press the X/Done icon on
the touchscreen to return to the previous menu. Pressing the
Up or Down Arrow buttons on the right side of the screen
will allow you to toggle up or down through the available
settings.
NOTE:
All settings should be changed with the ignition in the ON/
RUN position.
The following tables list the settings that may be found
within the Uconnect 3 radio, along with the selectable
options pertaining to each setting.
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
2020_JEEP_MP_OM_USA=GUID-E8C7E66B-DF9E-40BA-9B4A-03D9C7E22684=1=en=.backup.book Page 466
To Next Page
Loading...
