462 TECHNICAL SPECIFICATIONS
Chassis
Component Fluid, Lubricant, or Genuine Part
Manual Transmission – If Equipped
We recommend you use Mopar C Series Manual & Dual Dry Clutch
Transmission Fluid.
Six-Speed Automatic Transmission (FWD Models) –
If Equipped
Use only Mopar AW-1 Automatic Transmission Fluid, or
equivalent. Failure to use the correct fluid may affect the function or
performance of your transmission.
Nine-Speed Automatic Transmission (4WD Models) –
If Equipped
Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid,
or equivalent. Failure to use the correct fluid may affect the function
or performance of your transmission.
Power Transfer Unit (PTU) – If Equipped
We recommended you use Mopar Front Axle/PTU Synthetic Axle
Lubricant SAE 75W-90 (API GL-5).
Rear Differential (RDM) – If Equipped
We recommended you use Mopar Rear Axle/RDM Synthetic Axle
Lubricant SAE 75W-90 (API GL-5).
Brake Master Cylinder We recommend you use Mopar DOT 3.
Refrigerant
Use Only Refrigerant R134a
Charge Amounts:
2.4L Engines — 567g (1.25lb)
Compressor Oil
Use Only PAG Oil RL-897
2.4L Engines — 135ml (4.56oz)
2020_JEEP_MP_OM_USA=GUID-E8C7E66B-DF9E-40BA-9B4A-03D9C7E22684=1=en=.backup.book Page 462
To Next Page
Loading...
