342 IN CASE OF EMERGENCY
3. Remove the headlamp bulb cap.
Headlamp
4. Rotate the headlamp bulb socket counterclockwise then
pull outwards.
Headlamp Bulb Socket
5. Push on the locking tab on the headlamp bulb connector
and remove the bulb and socket.
6. Install the new headlamp bulb making sure it’s properly
locked.
7. Install the headlamp bulb and socket; turn it clockwise
making sure it is properly locked.
8. Reinstall the wheel liner.
NOTE:
We advise referring to an authorized dealer.
1 — Low Beam Bulb Cap
2 — High Beam Bulb Cap
2020_JEEP_MP_OM_USA=GUID-E8C7E66B-DF9E-40BA-9B4A-03D9C7E22684=1=en=.backup.book Page 342
To Next Page
Loading...
