IN CASE OF EMERGENCY 349
3. Replace the bulbs by pulling straight out of bulb housing.
Front Courtesy Bulb Housing
4. Insert the new bulbs, making sure that they are properly
locked.
5. Reassemble the bulb housing and courtesy light housing
making sure that they are properly locked.
6. Install the front courtesy light, making sure that it is prop-
erly locked.
Dome Light Vanity Mirror — If Equipped
To replace the bulbs proceed as follows:
1. Lift the cover of the mirror and pull out the mirror frame
with the mirror light cover attached.
2. Replace the bulb, releasing it from the side contacts, and
then insert the new bulb, making sure that it is properly
locked between the contacts.
Visor
1 — Visor Mirror Cover
2 — Visor Mirror Light
6
2020_JEEP_MP_OM_USA=GUID-E8C7E66B-DF9E-40BA-9B4A-03D9C7E22684=1=en=.backup.book Page 349
To Next Page
Loading...
