376 IN CASE OF EMERGENCY
Tire Service Kit And Components And Operation
Tire Service Kit Components
Using The Mode Select Knob And Hoses
Your Tire Service Kit is equipped with the following symbols
to indicate the air or sealant mode.
• Selecting Air Mode
Push in the Mode Select Knob and turn to this
position for air pump operation only.
• Selecting Sealant Mode
Push in the Mode Select Knob and turn to this
position to inject the Tire Service Kit Sealant and to
inflate the tire.
• Using The Power Button
Push and release the Power Button once to turn
the Tire Service Kit on. Push and release the Power
Button again to turn the Tire Service Kit off.
• Using The Deflation Button
Push the Deflation Button to reduce the air pres-
sure in the tire if it becomes over-inflated.
1 — Mode Select Knob
2 — Sealant/Air Hose
3 — Hose Accessories
4 — Sealant Bottle
5 — Power Plug
6 — Power Switch
7 — Deflation Button
8 — Pressure Gauge
2020_JEEP_MP_OM_USA=GUID-E8C7E66B-DF9E-40BA-9B4A-03D9C7E22684=1=en=.backup.book Page 376
To Next Page
Loading...
