Preface
1.1 Camera Description
1) This manual instruction is for reference only. As the equipment is updated, it may be
different from what is described in this pamphlet.
2) After receiving the products, please check whether all accessories are in the package.
3) Before installation, please turn on the power to check whether the camera picture appears
on the NVR(monitor).
4) The NVR has built-in wifi receiver. In order to ensure the IP camera can receive the NVR
signal perfectly, please install the camera in the scope that wifi signal can arrive. (please test
whether the NVR wifi signal is reachable or not in advance).
5) All the cameras have been matched with NVR, and the NVR can be viewed and operated
immediately after being powered on.
6) If you want to realize remote viewing on your smartphone,please connect the NVR to your
router by network cable.
Camera support bracket
2.4dbi antenna
IP68 waterproof metal case
infrared lights
Infrared sensor
3.6MM lens
RJ45 port
Network indicator
Power supply port
install on the wall install on the ceiling
Chapter 1 Introduction
- 01 - - 02 - - 03 - - 04 - - 05 -
- 06 - - 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 -
- 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 -
- 26 - - 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 -
- 36 - - 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 -
To Next Page
Loading...
Need help?
General
