1.2 Description of NVR video recorder (V80)
1) VGA port: Connect NVR and monitor with VGA cable(package does not include VGA cable).
2) HDMI port: Connect NVR and TV/monitor with HDMI cable.
3) LAN port:
A. Connecting the NVR and router with a network cable if you want to view remotely.
B. When you want to add a new camera to the NVR recorder,or when camera can't connect
to the NVR via wifi,you will need to connect the NVR and camera with a network cable.
4) USB port: Operated with a USB mouse,used to save video files with a USB flash drive,
used for system upgrade.
5) Power supply port: 12V/2A DC power adapter.
6) Antenna:Transmit wifi signal from NVR.
7) Power indicator: Light will turn to red when the NVR is powered.
8) HDD indicator:Light will turn to green when HDD works normally.
5dbi antenna
Power supply port
USB port
LAN port
HDMI port
VGA port
5dbi antenna
Hard drive indicator
Running indicator
Power indicator
Note:
1. The number of cameras supported to be added to NVR is related to the number of NVR
channels(you can find the number of channels supported by NVR in "Video Management").
2. Laptop can't be used as a display to present real time picture,but you can view real-time
picture and playback local videos on TV and PC.
- 01 - - 02 - - 03 - - 04 - - 05 -
- 06 - - 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 -
- 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 -
- 26 - - 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 -
- 36 - - 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 -
To Next Page
Loading...
Need help?
General
