Jennov J Series - 1.3 Description of 12-inch NVR monitor (V16)

1.3 Description of 12-inch NVR monitor (V16)
1) Power indicator: Light will turn to red when the NVR is powered on.
2) HDD indicator:Light will turn to green when HDD works normally.
3) Switch button:Press the button to turn on/off the screen.
4) HDMI port: Connect NVR and TV/monitor with HDMI cable.
5) LAN port:
A. Connecting the NVR and router with a network cable if you want to view remotely.
B. When you want to add a new camera to the NVR recorder,or when camera can't connect
to the NVR via wifi,you will need to connect the NVR and camera with a network cable.
6) USB port: Operated with a USB mouse,used to save video files with a USB flash drive,
used for system upgrade.
7) Power supply port: 12V/2A DC power adapter.
8) Antenna:Transmit wifi signal from NVR.
9) Monitor base stand:90 degree adjustment.
Hard drive installation place
Monitor base stand
USB port
LAN port
HDMI port
5dbi antenna
Power supply port
Switch button
Hard drive indicator
Power indicator
5dbi antenna
Note:
Due to system updates, the above buttons may be renamed.
1.12-inch NVR monitor only supports 3.5-inch hard drives.
2. Please note that it is not compatible with external hard drives.
- 01 - - 02 - - 03 - - 04 - - 05 -
- 06 - - 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 -
- 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 -
- 26 - - 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 -
- 36 - - 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 -