Jeti duplex DC-24 II - Hardware of the DS-24 II Transmitter - Description; Control Stick; Description of the Adjustment Screws for the Gimbal

radio control system
EN
6.1 Control Stick
6 Hardware of the DS-24II Transmitter - Description
LeftLeftLeftRightRightRight
B
D
A
G
F
E
B
D
C
C
B
D
A
G
F
E
B
D
C
C
6.1.1 Description of the Adjustment Screws for the gimbal
The adjustment screws of the gimbals are labeled with capital letters
(see fig. 6.01). These will be further used in the descriptions of
adjusting the individual functions of the gimbals.
A schematic representation of the adjustment screws and their
functions can be found in fig. 6.03. To adjust the gimbals, you will
need an allen key along with a magnetic key (see fig. 6.02), (a)(b)
which is included in the package.
Fig. 6.02Fig. 6.02Fig. 6.02
(a)
(b)
52
Fig. 6.01Fig. 6.01Fig. 6.01
www.modellmarkt24.ch