radio control system
EN
JETI will not restore or transfer any data or software from the
Product's original storage media. If the Product is replaced or
refund, all user generated data may be permanently deleted.
If the Product is under Warranty, You hereby agree to transfer the
ownership of replaced defective parts and such parts shall
automatically become the property of JETI.
2. Customer Responsibility
When using the Product
Read the user manual first and use the Product only according to the
user manual. Periodically back up your data stored on the Product.
Technical support line phone number can be found at
http://www.jetimodel.com/support.
Ensure that You have fully backed up all the data stored on Your
Product before any service process is started. You agree that
JETI may delete any data or LUA aplications installed on the
Product without restoring them. JETI shall not be held liable for
the permanent loss, damage, or misuse of your data.
Pack the Product in safe and stable packaging and make sure that all
accessories are in the package. The original packaging may be useful
for this purpose. JETI shall have no liability for the loss, damage or
destruction of accessories or removable storage devices, unless they
are caused by willful of gross negligent acts by JETI.
3. Warranty Service
If you have a product with an issue, you can send it directly to JETI
Model company, or to your dealer where you purchased it. Please
attach invoice for warranty service & repair.
4. Exclusions from this Limited Warranty Service
JETI does not warrant uninterrupted or error-free operation of this
Product, The Warranty only covers technical hardware issues during
the Warranty Period and in normal use conditions. It applies to
firmware issues but not to any other software issues or customer
induced damages or circumstances such as but not limited to:
a) Damage caused to this Product(s) by you or any non-authorized
third party;
b) The serial number of the Product, components or accessories has
been altered, cancelled or removed;
c) Obsolescence;
d) Damage (accidental or otherwise) to the Product that does not
impact the Product's operation and functions, such as without
limitation to rust, change in color, texture or finish, wear and tear,
and gradual deterioration;
e) Damage to the Product caused by improper installation,
improper connection or malfunction of a peripheral device such
as printer, optical drive, network card, or USB device, etc.
5. Limitation of Liability
Except as provided in this Warranty and to the maximum extent
permitted by law, JETI is not responsible for direct, special, incidental
or consequential damages resulting from any breach of warranty or
condition, or under any other legal theory, including but not limited
to loss of use; loss of revenue; loss of, damage to or corruption of
data; or any indirect or consequential loss or damage whatsoever
caused including the replacement of equipment and property, any
costs of recovering or reproducing any data stored on or used with
12
www.modellmarkt24.ch
To Next Page
Loading...