20
6.1- Starting the machine on/off
6- Step by step operation
Attention:
Before start the operation, have the
assurance that electric fittings, assembly
of detached parts and operation
adjustments have been done correctly.
a) If you purchased the machine with motor, turn it on by
the button “ON” (1).
b) To turn the machine OFF, push the button “OFF” (2).
NOTE: Before turning off the machine, leave it working
free (without product) about three minutes to clean the
system.
a) Turn the machine on.
b) Place the grains on the hopper (1).
c) Adjust the grains flow.
ATTENTION: Respect the working capacity of the
machine. Avoid grains overload.
d) The disintegrated product will flow through the lower
outlet (2).
6.2- Operating the machine in grain chopper mode
3
2
1
2
1
To Next Page
Loading...
