22
7- Maintenance instructions
7.1- Grease lubricating points
Lubricate each 8 work hours or daily the bearing of the chopper (see picture below), using a
grease pump.
Recommended grease
Lithium soap base grease Grade 2.
Note:
Lubricate after a work period, because the
grease flows better when the machine is still
warm.
Use the common sense regarding the amount
of grease to be applied. Avoid overstatement!
Beware of hot oil to lubricate the machine
after a period of work, always use personal
protective equipment to prevent burns.
To Next Page
Loading...
