Content
4
1- Introduction 03
2- Safety recommendations 06
2.1- When reading the manual 06
2.2- When operating the machine 07
2.3- When making maintenance in the machine 07
2.4- Transport on truck 07
3- Machine presentation 08
3.1- Parts identification 08
3.2- Operation 09
3.3- Technical specifications 10
4- Machine setup 11
4.1- Machine leveling and positioning 11
4.2- Electric fitting: Machine with motor 12
4.3- Motor installation 13
4.4- Assembly of the detached parts 14
5- Operation adjustments 16
5.1- To operate the JF 2D as grain chopper 16
5.2- To operate the JF 2D as forage chopper 18
5.3- Machine work speed adjustment 19
6- Step by step operation 20
6.1- Starting the machine on/off 20
6.2- Operating the machine in grain chopper mode 20
6.3- Operating the machine in forage chopper mode 21
7- Maintenance instructions 22
7.1- Grease lubricating points 22
7.2- Chopper knives sharpening 23
7.3- Gap adjustments between knife and counterknife 24
7.4- Counterknife replacement 25
7.5- Change of grinder hammers 26
7.6- Pulley alignment 28
7.7- Belt tension adjustment and replacement 29
7.8- Machine conservation 30
8- Stickers found on the head 30
9- Detached items that come along with the machine 31
To Next Page
Loading...
