General Information and Specifications
2.6
3507, 3508, 3509, 3512, 3513, 4007, 4008, 4009, 4012, 4013
2.3 SPECIFICATIONS
2.3.1 Travel Speeds
2.3.2 Hydraulic Cylinder Performance Specifications
Note: Machine with no load, engine at full throttle, hydraulic oil above 130° F (54° C) minimum, engine at operating
temperature.
2.3.3 Electrical System
Note: Refer to Section 9.4, “Fuses and Relays,” for more information.
First Gear 5 km/h (3.1 mph)
Second Gear 10 km/h (6.2 mph)
Third Gear 25 km/h (15.5 mph)
Fourth Gear (Turbo Only) 35 km/h (21.7 mph)
Function Approximate Times (sec.)
7M 8M 9M 12M 13M
Boom Extend 11,60 11,60 13,30 14,03 16,88
Boom Retract 9,83 9,83 11,27 12,48 15,02
Boom Lift 8,28 9,43 14,0 12,32 14,00
Boom Lower 5,63 6,41 9,65 8,49 9,65
Attachment Tilt -
UP
9,78 9,78 9,78 9,78 9,78
Attachment Tilt -
DOWN
4,50 4,50 4,50 4,50 4,50
Outrigger - UP N/A N/A N/A 2,93 2,93
Outrigger -
DOWN
N/A N/A N/A 2,19 2,19
Sway 11,0 11,0 11,0 11,0 11,0
Battery:
Type, Rating 12V DC, Negative (-) Ground, Limited Maintenance,
Wet Charged
Quantity 1 (100 Ah) (C
20
)
Reserve Capacity CCA @ -18° C: 880 EN
Group/Series DIN 600,38
Alternator 14V, 70 Amps
Starter 12V, 3,0 KW Type EV (Gear Reduction)
Courtesy of Crane.Market
To Next Page
Loading...
