Engine: Perkins 1104-42 & 1104-42T
7.2
3507, 3508, 3509, 3512, 3513, 4007, 4008, 4009, 4012, 4013
7.1 INTRODUCTION
7.1.1 Disclaimer and Scope
These instructions are written for worldwide use. In
territories where legal requirements govern engine smoke
emission, noise, safety factors, etc., apply all instructions,
data and dimensions provided herein in such a way that
after maintenance, service and repair of the engine,
engine operation does not violate local regulations.
IMPORTANT: These instructions cover only the routine
maintenance, removal, installation and troubleshooting
of the engine. For assistance with comprehensive engine
diagnosis, repair and component replacement, contact
your local Perkins Service partner.
A gradual running-in (break-in) of a new engine is not
necessary. Full load can be applied to a new engine as
soon as the engine is put into service and the coolant
temperature is at least 60° C (140° F). Extended light-
load operation during the early life of the engine is not
recommended. DO NOT run the engine at high, no-load
speeds. DO NOT apply an overload to the engine.
Courtesy of Crane.Market
To Next Page
Loading...
