Jofemar J-2000 - Second Level Programming

MNP11M01GB06 May 2007- Rev.4 Page: 15 de 40
60 : Access code to third level. è
61 : Identification number. è
62 : Date of manufacture. è
63 : Country code. è
64 : Number of connections of the compact. è
65 : Protocol selection: MDB or Executive. è
66: Number of prices controlled by the compact in retention mode. è
67: Reprogramming a new coin in the compact. è
70 a 81 : Sales counters. è
85 : Number of sales. è
86 : Erasing of counters. è
PROGRAMMING ADDRESSES ACCES LEVELS
"_00" MAXIMUM REFUND / MAXIMUM CREDIT.
"1_00" The value programmed at this address represents the maximum value of
which a refund is allowed.
"2_00" This value is used to establish the maximum credit that can be accumulated
when is in multiple vend or the compact is in not retention mode.
To change this value the second level must be accessed. At the second level (right-
hand point of the display lit), pressing “3” will indicate the value programmed.
Pressing “3” again increase the digit select. Pressing “2” will select the next digit.
“-101” to “-199” PROGRAMMING PRICES
Addresses “-101” to “-199” allows the price programming of the different sale
channels. When the compact is running in no prices retention mode, this address will
not appear. When passing from no retention mode to retention, the prices will appear
programmed with a value of 9999.
If a price is programmed to zero this indicates a free (of charge) sale.
IF NO PRICE IS DIFFERENT FROM ZERO THE COMPACT WILL NOT ACCEPT
CREDIT
“1101” to “1199” Nº OF VENDS FOR EACH PRICE
When the J-2000 works in price retention, the number of sales made from each one
of the prices can be consulted at these addresses. Each address has two fields:
In field 1, pressing “3” the compact will show the number of partials vends for this
price.
In field 2, pressing “3” the compact will show the number of total vends for this price .
Pressing “1” the compact will return to the address.
“X_21” COINS IN CHANGERS
The number of coins stored in the tube change tubes can be consulted in this
address.
By pressing “2” we can select the change tube and pressing “3” we can see the
number of coins.
1_21: Nº of coins in tube 1.