Page 4
1.0 INTRODUCTION
Congratulations on purchasing the VPI System III computer wheel balancer. This wheel balancer is
designed for ease of operation, accuracy, reliability and speed. With proper maintenance and care your
wheel balancer will provide many years of trouble-free operation.
Instructions on use, maintenance and operational requirements of the machine are covered in this manual.
STORE THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
READ THIS MANUAL THOROUGHLY BEFORE USING THE MACHINE.
1.1 SAFETY NOTICE
This manual is a part of the balancer product.
Read carefully all warnings and instructions of this manual since they provide important information
concerning safety and maintenance.
1.2 BALANCER APPLICATION
The John Bean wheel balancer model VPI System III is intended to be used as a device to balance car,
and light truck wheels within the following range:
Maximum tire diameter : 44” (1117mm)
Maximum wheel diameter : 30” (762mm)
Maximum wheel width : 15” (381mm)
Maximum wheel weight : 154 lbs (70 kg)
This device is to be only used in the application for which it is specifically designed.
Any other use shall be considered as improper and thus not reasonable.
The manufacturer shall not be considered liable for possible damages caused by improper, wrong or non
reasonable use.
To Next Page
Loading...
