John Bean VPI SYSTEM III - Standard Accessories; Optional Accessories

Page 6
1.5 STANDARD ACCESSORIES
Standard accessories ( Figures 1, 2, and 3,) included
with the VPI System III are:
1 EAM0003J08A Cone, 85-132 mm / 3.3”-5.2”
2 EAM0003J07A Cone, 71-99 mm / 2.8”-3.9”
3 EAM0003J06A Cone, 56-84 mm / 2.2”-3.3”
4 EAM0003J05A Cone, 43-63 mm / 1.7” - 2.5”
5 EAC0058D07A Cup - Pressure
6 EAC0058D08A Disk - Pressure
7 EAA0263G66A Quick Nut
8 EAM0005D40A Weight - Calibration
9 EAM0021D90A Standard 40mm Stub Shaft
10 EAA0247G21A Caliper - Rim Width
11 EAC0060G02A Flange - Cover, Hook
12 EAM0006G01A Pin - Accessory
13 58839 Weight Pliers
14 EAM0005D34A Fastening Rod
15 EAC0058D15A Soft Protector ring
Figure 2
Figure 3
1.6 OPTIONAL ACCESSORIES
Unilug adapter kit - pn 110614
Truck cone kit - pn 110612
Motorcycle adaptor kit - EAA0260D80A
Power Clamp Option Accessories
A EAC0058D15A Soft Protective Ring
B EAC0058D07A Cup - Large Pressure
C EAA0283D53A Power Clamp Nut
D EAM0005D54A Plastic Sleeve
E EAC0058D08A Small Presure Disk
13
Figure 1