Page 14
NOTE: It must be very clear that the feature works assuming that some residual imbalance
can be left on the wheel. The tire shop will save weight, but wheels will be balanced with a lower
degree of accuracy.
Weight Miser
™™
™™
™ Operation
1. The Weight Miser
™™
™™
™ function is enabled or disabled by depressing the Weight
Miser
™™
™™
™ button on keyboard. When the button is pressed, the machine displays
“SAV ON” for one second. Then machine displays the weights in Weight Miser
mode.
2. Pressing the Weight Miser
™™
™™
™ button again, the machine displays “SAV OFF” and returns to
the normal balancing mode.
3. The weight savings are stored in memory to be recalled later.
4. The Operator can check the total savings of the Weight Miser
™™
™™
™ by entering “Function Code”
F89 as described below.
(a) Enter F89, the machine displays "SAV ING" for 1 second.
(b) The display will then show the total amount weight saving in grams or ounces depend on
the setting of the weight unit.
(c) The maximum total amount of saving weight can be displayed is 999,999 gram ( = 1 ton)
or 999,999 oz ( = 62,500 lbs).
(d) Next, Press the F button, the machine displays "Ent Pri ce ".
(e) Use the UP and DOWN buttons to enter the unit price of weight in cents, such as .75 cents
per ounce.
(d) Pressing the F button again machine displays the total a mount money saved by Weight
Miser function.
(f) The value is rounded to the nearest dollar (if weight unit is ounce) or Euro (if weight unit is
grams).
(g) If continuously press F button, machine displays "Erase", " 1 1 1", " 2 2 2", " 3 3 3" and
finally "CLE AN SAV". At that time the memory is reset to 0.
(h) Press [STOP] at any time to exit F89.
To Next Page
Loading...
