INTRODUCTION
This manual, in combination with the appropriate controls
related manuals, provides the information necessary to safely
install and start up Frick AcuAir
®
equipment. Due to the custom
nature of the AcuAir
®
products there may be areas beyond the
scope of this manual. If there are any questions about a special
application lacking the required information, please contact
the installing contractor or your local Frick Sales Ofce.
The customer is responsible for providing qualied and trained
personnel to install and operate the equipment. Consult all
local building, occupational safety, electrical, gas, and other
codes applicable to the installation.
A variety of optional safety features are available from the
manufacturer; it is the responsibility of the owner to determine
if the unit is equipped with all of the safety devices required
for the particular application.
Safety considerations include:
1. The accessibility of the equipment to non-service personnel.
2. The provision of electrical lockout switches.
3. Maintenance procedures.
4. Automatic control sequences.
Please read the complete manual
prior to installing, operating, or servicing the equipment.
To Next Page
Loading...
