Johnson Controls T9100 - Local API and Protocol Settings; Configuring Local API; Selecting API Protocol

66
Main Menu Buttons - Wi-Fi
To turn on the HTTP Local API select Local API
Press BACK to return to previous screen.
If a Secure API is required, then select API Protocol
This is the default with the local API OFF.
Upon pressing API Protocol, the following screen will appear.
Then select HTTPS and press BACK
• Local API - OFF
• Local API - OFF
• API Protocol (http)
• API Protocol (http)
• API Protocol (http)
• HTTPS
• HTTP
• Local API - ON
• HTTP
• HTTPS