Johnson Controls YORK OPTIVIEW CONTROL CENTER User Manual

JOHNSON CONTROLS
122
FORM 160.10-O1
ISSUE DATE: 4/27/2018
SECTION 4 - PRINTERS
5 Not Used
6 off no parity
7 off Pin 20 & pin 11 act as busy
line
WEIGH-TRONIX Printer
IMP‑24 Model 2600
1 off 1200 Baud*
2 on 1200 Baud*
Model 1220 Congure Menu
Baud= 1200
Data Bits = 8
Stop Bits = 1
Hshake = Busy-Line
Cols = 32
Invert = No
Font = 5 x 8
Mag = None
Custom Menu
Auto Seq = No
Zero = 0
Pound sign = #
_(Underscore)
Busy invert = no
Online/offline = yes
Ext Ch Set = no
Print ready = yes
Set Clock = Not Used
Reset Seq = Not Used
SEIKO
Dip Switch Settings
1-1 off Input-Serial
1-2 on Printing speed high
1-3 on Auto loading - on
1-4 off Auto LF - off
1-5 on Setting Command - Enable
1-6 off Printing density - 100%
1-7 on Printing density - 100%
1-8 on Printing, density - 100%
2-1 on Printing Columns - 40
2-2 on User Font Back-up - on
2-3 on Character Select - normal
2-4 off Zero - slash
2-5 on International character set -
American
2-6 on International character set -
American
2-7 on International character set -
American
2-8 off International character set -
American
3-1 on Data length - 8 bits
3-2 on Parity Setting - no
3-3 on Parity condition - odd
3-4 on Busy control - H/W busy
3-5 on Baud rate select - 1200*
3-6 off Baud rate select - 1200*
3-7 on Baud rate select - 1200*
3-8 off Baud rate select - 1200*
* Settings shown for 1200 Baud. Other Baud rates can
be selected. Refer to printer manufacturer’s manual
supplied with printer.
CONTROL CENTER SETUP
Chiller ID
Access Level Required: OPERATOR
An “Identification Number” can be assigned to the
chiller at the COMMS (optional). This number will ap-
pear at the top of each report.
Printer Type
Access Level Required: OPERATOR
Using the Printer screen, the actual printer type con-
nected to the control center must be entered. Selection
determines the control codes that are sent to the printer.
These codes determine such things as lines per inch,
character width and general formatting. Available se-
lections are: Okidata, Weigh-Tronix, Seiko and Epson.

Johnson Controls YORK OPTIVIEW CONTROL CENTER Specifications

General

Brand	Johnson Controls
Model	YORK OPTIVIEW CONTROL CENTER
Category	Control Panel
Language	English