JOHNSON CONTROLS
17
SECTION 2 - OPTIVIEW OPERATION
FORM 160.10-O1
ISSUE DATE: 4/27/2018
2
Condenser Liquid Temperature – Leaving
Displays the temperature of the liquid as the liquid
leaves the condenser.
Condenser Liquid Temperature – Return
Displays the temperature of the liquid as the liquid en-
ters the condenser.
Motor Run (LED)
LED is lit when the digital output controlling the motor
starter contact is on. Signals the motor is running.
Input Power (kW)
Available only if the chiller system is utilizing a Vari-
able Speed Drive or Mod “B” Solid State Starter motor
controller. This displays the total input power used by
the system.
% Full Load Amps
This displays the percentage of full load amps utilized
by the system.
Operating Hours
Displays the cumulative operating hours of the chiller.
OVERVIEW
The “Home” screen is the default display screen on
the OptiView LCD. The primary values which must
be monitored and controlled are shown on this screen.
The Home screen display depicts a visual representa-
tion of the chiller itself. Animation indicates chilled
liquid flow.
Trane CVHA and CVHB model chillers
have a different display chiller graphic for
this screen. All functions and setpoints re-
main the same. See APPENDIX A on page
131 for the CVHA and CVHB graphic
associated with this screen.
DISPLAY ONLY
Chilled Liquid Temperature – Leaving
Displays the temperature of the liquid as the liquid
leaves the evaporator.
Chilled Liquid Temperature – Return
Displays the temperature of the liquid as the liquid en-
ters the evaporator.
HOME SCREEN
LD09991
FIGURE 3 - HOME SCREEN
To Next Page
Loading...
