JOHNSON CONTROLS
19
SECTION 2 - OPTIVIEW OPERATION
FORM 160.10-O1
ISSUE DATE: 4/27/2018
2
Oil Sump
Advances to a detailed view of all the oil pump and oil
sump parameters such as oil temperature and pressure.
Motor
A detailed view of the motor controller parameters,
specific to the controller type presently utilized on the
chiller system. This allows programming of the current
limit and the pulldown demand limit values. For a VSD
system, the adaptive capacity control and harmonic fil-
ter information is controlled under this screen.
Setpoints
This screen provides a single location to program the
most common system setpoints. This screen is also the
gateway to many of the general system setup param-
eters such as: Date/Time, Display Units, Scheduling,
Printer Setup, etc.
History
This screen provides access to a “snapshot” of system
data at each of the last ten (10) shutdown conditions.
This is particularly useful when troubleshooting chiller
system problems.
To Next Page
Loading...
Need help?
General
