Johnson Controls YORK OPTIVIEW CONTROL CENTER User Manual

JOHNSON CONTROLS
94
FORM 160.10-O1
ISSUE DATE: 4/27/2018
SECTION 2 - OPTIVIEW OPERATION
PROGRAMMABLE
Start
Access Level Required: OPERATOR
Pressing this key clears and starts a new graph, sets the
time of day to the present clock time and begins the
trending data collection. This key is only available if
trending is stopped.
Stop
Access Level Required: OPERATOR
Pressing this key stops the trending. The trend data
is frozen on the display until another graph is started
with the “Start” key. The “Stop” key is only available
if trending is running.
Y-Axis
Access Level Required: VIEW
This key toggles the Y-Axis labels of the graph. Each
key press changes the label to another of the selected
parameters. The Y-Axis label that is being displayed is
identified at the top of the graph
X-Axis
Access Level Required: VIEW
This key toggles the X-Axis labels of the graph. Each
key press alternates the scaling between time of day
and elapsed time. The “Time of Day” scaling is in 24-
hour format. The “Elapsed Time” scaling is the time
elapsed since the “Start” key was pressed, starting the
trending.
NAVIGATION
Home
Access Level Required: VIEW
Returns the display to the Home screen.
History
Access Level Required: VIEW
Returns the display to the History screen.
Trend Setup
Access Level Required: OPERATOR
Advances to a sub-screen for configuring the trending
display. This key is only displayed if the trending is
stopped.

Johnson Controls YORK OPTIVIEW CONTROL CENTER Specifications

General

Brand	Johnson Controls
Model	YORK OPTIVIEW CONTROL CENTER
Category	Control Panel
Language	English