FORM 160.54-O1
ISSUE DATE: 9/10/2014
JOHNSON CONTROLS
84
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
Pulldown Demand Time
Access Level Required: OPERATOR
Allows the user to set a period of time for which the
pulldown demand limit will be in effect after the chiller
starts.
NAVIGATION
Home
Access Level Required: VIEW
Returns user to HOME Screen.
Motor Lube
(Software version C.MLM.01.14.xxx (and later) or
C.OPT.01.14.306 (and later))
Access Level Required: VIEW
Moves to the subscreen allowing operator acknowledge-
ment of the compressor motor lubrication and viewing
of the compressor motor lubrication parameters.
Motor Details
(Software version C.OPT.01.22.307 and later)
Access Level Required: SERVICE
Moves to a subscreen that provides information and
setpoints pertinent to the Motor Monitoring feature.
To Next Page
Loading...
