FORM 160.54-O1
ISSUE DATE: 9/10/2014
JOHNSON CONTROLS
148
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
ACC Map Report
Access Level Required: SERVICE
Only available if the chiller system utilizes a Variable
Speed Drive motor controller. The chiller requests the
entire surge map from the ACC. As the map is received,
the parameters for each point are printed.
Print Report
Access Level Required: OPERATOR
Select the report type to print when the PRINT RE-
PORT key is selected. This can vary from status report
(present system parameters), Setpoints report (present
value of the system setpoints), Schedule report (present
value of the system schedule times), or a Sales Order
Data report (information provided on the SALES OR-
DER Screen). A print report is generated upon comple-
tion of selection.
Print All Histories
Access Level Required: OPERATOR
Generate a report of the system data at the time of all
stored shutdowns.
NAVIGATION
Home
Access Level Required: VIEW
Returns user to HOME Screen.
Setup
Access Level Required: VIEW
Returns user to SETUP Screen.
To Next Page
Loading...
