EasyManuals Logo

Johnson Controls YORK YK Style G OPTIVIEW User Manual

Johnson Controls YORK YK Style G OPTIVIEW
306 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #192 background imageLoading...
Page #192 background image
FORM 160.54-O1
ISSUE DATE: 9/10/2014
JOHNSON CONTROLS
152
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
Hot Gas Control (Enabled/Disabled)
Access Level Required: SERVICE
Enables and disables the optional Hot Gas Bypass
Control feature.
Refrigerant Level Control (Enabled / Disabled)
Access Level Required: SERVICE
Enables and Disables the Refrigerant Level Control
Feature.
Flow Switch
(Style F and later chillers equipped with Flash Memory
Card version C.MLM.01.08.xxx and later)
Access Level Required: SERVICE
Used to enter the applicable flow switch type. Style F
and later chillers could be equipped with either Pad-
dle-type or Thermal-Type Flow sensors. The actual
type installed must be entered to allow the program to
read the correct input. Key is only displayed if Style
F chiller is selected with the Chiller Style/Compressor
Setpoint below.
VGD (Enabled/Disabled)
(Software version C.MLM.01.10.xxx (and later) or
C.OPT.01.10.302 (and later))
Access Level Required: SERVICE
Enables and disables the Variable Geometry Diffuser
feature. If equipped with this feature, it should be en-
abled. Otherwise, it should be disabled.
Chiller Style/Compressor
(Flash Memory Card version C.MLM.01.07.xxx and
later)
Access Level Required: SERVICE
Used to enter the chiller style/compressor combination.
Once the applicable chiller style/compressor combina-
tion is entered, the program controls the chiller per the
requirements of the entered chiller style and compres-
sor.
Edit Phone Numbers
(Flash Memory Card version C.MLM.01.05.xxx and
later)
Access Level Required: SERVICE
Displays up to two service phone numbers. The Re-
gional service phone number is displayed as the
first number. Although the label and number can be
changed appropriately, the default for this entry is
“Johnson Controls North American Toll Free Number
1-800-861-1001”. The Local service phone number is
displayed as the second number. Although blank by de-
fault, the appropriate label and number can be entered
by a Service Technician.
NAVIGATION
Home
Access Level Required: VIEW
Returns user to HOME Screen.
Setup
Access Level Required: VIEW
Returns user to SETUP Screen.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Johnson Controls YORK YK Style G OPTIVIEW and is the answer not in the manual?

Johnson Controls YORK YK Style G OPTIVIEW Specifications

General IconGeneral
BrandJohnson Controls
ModelYORK YK Style G OPTIVIEW
CategoryChiller
LanguageEnglish

Related product manuals