3-183
3.22 NAVTEX Function
Memo
This function is able to be used when connecting JRC MFD JAN-7201/9201 which is received
NAVTEX data.
In the following cases, you cannot receive NAVTEX Message.
・ JAN-7201/9201 has been turned off.
・ NeCST and JAN-7201/9201 are not linked.
・ NAVTEX Message in JAN-7201 / 9201 has not been updated.
・ The version of JMB application in NeCST is older than 2.0.
NAVTEX message is displayed.
The detail of message is able to be confirmed.
To Next Page
Loading...