3-132
Setting Navigation
Set the depth contour etc. that are displayed on the chart.
The items of Navigation are displayed.
Setting item Description Setting value
Shallow contour Displays the shallow contours to be displayed on the chart at
the set depth.
0.0 to 200.0 m
Safety depth Highlights the spot depth less than or equal to the set value. 0.0 to 200.0 m
Safety contour Displays the safety contours to be displayed on the chart at the
set depth.
0.0 to 200.0 m
Deep contour Displays the deep contours to be displayed on the chart at the
set depth.
0.0 to 200.0 m
Safety height Sets the ship height above the sea level. 0.0 to 200.0 m
Tapping the [Cancel] button cancels the setting change.
To Next Page
Loading...