JRC JMA-3300 Series - Manual Speed; Mag Compass Setting

Chapter 4 ADJUST MENU SETTINGS
4.7 I/F DEVICE
4-34
Note:
 The manually entered speed is effective only when “Manual” is set.
 2-axis log cannot be effective when the sentence VBW of NMEA0183 is not
entered.
4.7.6 MANUAL SPEED
Sets the speed when the manual mode is selected in "4.7.6 MANUAL SPEED".
 Manual Speed
1 Open I/F Device - Manual Speed .
"Manual Speed" menu appears.
Press the cursor key or turn the [MULTI] control to set the speed.
The speed can be set between 0.0 and 100.0 kn.
Reference:
The manually entered speed is effective only when “Manual” is set.
4.7.7 MAG COMPASS SETTING
Set the MAG compass.
 "MAG Compass Setting" operations
1 Open I/F Device - MAG Compass Setting .
"MAG Compass Setting" menu appears.