Chapter 4 ADJUST MENU SETTINGS
4.3 RADAR ECHO
4-14
STC Slope Correction
Sets the slope of the STC curve.
1 Open Sea - STC Slope Correction .
"STC Slope Correction" menu appears.
Press the cursor key or turn the [MULTI] control to set the slope correction value.
The slope correction value can be set between 0.0 and 2.0.
STC Offset
Sets the subtraction amount of STC curve.
1 Open Sea - STC Offset .
"STC Offset" menu appears.
Press the cursor key or turn the [MULTI] control to set the STC offset.
The STC offset can be set between 0 and FF.
4.3.6 RAIN/SNOW CLUTTER SUPPRESSION
Sets the FTC Curve.
"Rain" operations
1 Open RADAR Echo - Rain .
"Rain" menu appears.
To Next Page
Loading...
Need help?
General
