Chapter 4 ADJUST MENU SETTINGS
4.3 RADAR ECHO
4-15
4
NSTALLATION MANUAL
FTC Curve Select
Switches the FTC Curve.
1 Open Sea - FTC Curve Select .
"FTC Curve Select" menu appears.
Sea and rivers can be set.
FTC Slope Correction
Sets the slope of the FTC curve.
1 Open Sea - FTC Slope Correction .
"FTC Slope Correction" menu appears.
Press the cursor key or turn the [MULTI] control to set the slope correction value.
The slope correction value can be set between 0.0 and 2.0.
FTC Offset
Sets the subtraction amount of FTC curve.
1 Open Sea - FTC Offset .
"FTC Offset" menu appears.
Press the cursor key or turn the [MULTI] control to set the STC offset.
The STC offset can be set between 0 and FF.
To Next Page
Loading...
Need help?
General
