JRC JMA-3300 Series - Error Alarm Mask; Scanner

Chapter 4 ADJUST MENU SETTINGS
4.14 ERROR ALARM MASK
4-98
4.14 ERROR ALARM MASK
Sets the error alarm.
 "Error Alarm Mask" operations
1 Open Error Alarm Mask from the Adjust Menu.
"Error Alarm Mask" menu appears.
4.14.1 SCANNER
Sets the error alarm of scanner.
 "Scanner" operations
1 Open Error Alarm Mask - Scanner .
"Scanner" menu appears.
 Setting Error Alarm Mask of Scanner
Sets the error alarm of scanner.
Note:
 Do not change the set value carelessly.
If alarm detection is turned off or detection time is changed, be careful
because the alarm may not occur or may be delayed.
Items for the error alarm of scanner
 Scanner(Time Out)
 Scanner(Data)
 Scanner(AZI)
 Scanner(HL)