Chapter 4 ADJUST MENU SETTINGS
4.11 MAINTENANCE
4-72
4.11.2 SYSTEM TIME CLEAR
The system calculates and stores the total operating time of the display unit.
The operating time can be initialized.
System Time Clear
1 Open Maintenance - System Time Clear .
Yes : Clears the operating time.
No : Does not clear.
4.11.3 SCANNER TIME CLEAR
The following operating time is calculated and stored in the scanner.
Scanner Running Time
Scanner Transmit Time
Motor Rotating Time
Initialize those operating time above when magnetron or scanner motor is replaced.
"Scanner Time Clear" operations
1 Open Maintenance - Scanner Time Clear .
"Scanner Time Clear" menu appears.
To Next Page
Loading...
Need help?
General
