Chapter 4 ADJUST MENU SETTINGS
4.9 GPS
4-55
4
NSTALLATION MANUAL
Satellite Search Setting
Sets the selection mode for Satellite number to be used.
1 Open SBAS Setting - Satellite Search .
"Satellite Search" menu appears.
AUTO : Automatically selects the SBAS satellite number
Manual : Manually enter the SBAS satellite number
After setting, open "4. Send Data", and send the setting to the SBAS receiver.
Ranging Satellite Setting
Set whether or not the SBAS satellite is to be used as a positioning satellite.
1 Open SBAS Setting - Ranging .
"Ranging" menu appears.
Off : Does not use SBAS satellite.
On : Uses SBAS satellite.
After setting, open "4. Send Data", and send the setting to the SBAS receiver.
SBAS Satellite Number Setting
Sets the SBAS Satellite number to be used.
This setting is enabled when "Satellite Search" is set to "2. Manual".
1 Open SBAS Setting - SBAS Satellite Number .
To Next Page
Loading...
