Chapter 4 ADJUST MENU SETTINGS
4.9 GPS
4-61
4
NSTALLATION MANUAL
TD2
Sets the TD value of slave station 2.
1 Open LORAN C - TD2 .
"TD2" menu appears.
Press the cursor key or turn the [MULTI] control to set the TD value.
TD value can be set between 0 and 99.
TD1 Correction
Enters the propagation time correction value for the TD value of slave station 1.
1 Open LORAN C - TD1 Correction .
Press the cursor key or turn the [MULTI] control to set the correction value.
The correction value can be set between 0.0 and 9.9 μsec.
TD2 Correction
Enters the propagation time correction value for the TD value of slave station 2.
1 Open LORAN C - TD2 Correction .
Press the cursor key or turn the [MULTI] control to set the correction value.
The correction value can be set between 0.0 and 9.9 μsec.
To Next Page
Loading...
Need help?
General
