JRC JMA-3300 Series - Page 167

Chapter 4 ADJUST MENU SETTINGS
4.14 ERROR ALARM MASK
4-101
4
NSTALLATION MANUAL
 Display Unit(HL)
 Display Unit(DSP)
 COM Port
 Temperature
1 Open Display Unit - Display Unit(Video) .
"Display Unit(Video)" menu appears.
 Alarm Sensitivity
Turns on/off the alarm sensitivity.
1 Open Display Unit(Video) - Alarm Sensitivity .
Switches on/off for the alarm sensitivity.
Operate the same way for the other items.
 Sensitivity Time
Sets the time for generating alarm after error detection.
1 Open Display Unit(Video) - Sensitivity Time .
"Sensitivity Time" menu appears.
Press the cursor key or turn the [MULTI] control to set the time.
The time can be set between 0 and 999 sec.
Operate the same way for the other items.