JRC JMA-3404 - 5.25 GUARD ZONE

Chapter 5 VARIOUS FUNCTIONS
1
08
5.25 GUARD ZONE
This function sounds an alarm by detecting the movement of the target in the created zone.
Two fan-shaped zones can be created. Zone alarm level and mode can be set for each zone.
The automatic acquisition function (Auto TT) can be set to the zone.
Note:
The guard zone for which the Auto TT function can be set is only zone 1. An alarm function other than the
Auto TT function can be set in zone 2.
Each Zone 2 setting menu is the same as Zone 1.
Zone Mode
䐡 Select each menu.㻌
Zone Alarm Level
䐟 Press the MENU button.㻌䐠 Select “Guard Zone.”㻌