JRC JMA-9172-SA User Manual

JMA-9172-SA Instruction Manual > 3.BASIC OPERATION > 3.4 GENERAL RADAR OPERATION
3－27
3
3.4.4 Use Video Processing (PROC)
This function reduces unnecessary noise to highlight targets.
Procedures
1) Left-click the PROC button located at the lower left of the
display.
The video processing modes are switched.
→ →
← ←
• If video processing mode is set to CORREL , it may
be difficult to detect high speed target.
Video process modes
: Select this mode in general.
: Select this mode when many rain/snow clutter returns are detected.
: Select this mode to highlight targets while suppressing sea clutter
returns.
: Select this mode to detect small targets hidden by sea clutter
returns.
: Select this mode when own ship yaws wildly.
: Select this mode to detect small targets of which detection
probability is low.
Attention
PROC Off
3Scan CORREL
4Scan CORREL
Peak Hold
Remain
5Scan CORREL
PROC Off
3Scan CORREL
4Scan CORREL
5Scan CORREL
Remain
Peak Hold

JRC JMA-9172-SA Specifications

General

Brand	JRC
Model	JMA-9172-SA
Category	Marine Radar
Language	English