JMA-9172-SA Instruction Manual > 3.BASIC OPERATION > 3.9 USE FUNCTION KEY [USER]
3－119
3
3.9.4 Overview of saved Function Setting Data
The overview of saved function setting data is as follows:
1) Open the User Function Setting menu by performing the menu
operation below.
→
→
→
page 1-[1] Mode
• Calls the default value of the mode, and saves it for the function number.
page 1-[6] Save Present State
• The currently operating state can be saved for the function number.
• Use this function to save the state of good setting that will be frequently used.
page 5-[8] Set Mode Default
• Saves the setting of the current function number, as the default setting of the
mode.
page 5-[9] Initialize
• Changes the memory contents of the mode, which is used with the current
function number, back to the factory setting.
Factory-set data: : Saved data that general operation cannot change
Default data: : Standard data of each function mode that users can change
Data that can be
called:
: Saved data that can be called by pressing the [USER] key
To Next Page
Loading...
