JRC JMA-9172-SA - Parts Required for Periodic Replacement; Replacement of Motor; Scanner Unit Nke-1532

8－12
JMA-9172-SA Instruction Manual > 8.COUNTERMEASURE FOR TROUBLE ... > 8.4 REPLACEMENT OF MAJOR PARTS
8.4.1 Parts Required for Periodic Replacement
Here are parts required for periodic replacement
8.4.2 Replacement of Motor
8.4.2.1 Scanner Unit NKE-1532
[Required tools]
• Wrenches (M5, M8, and M10)
• A Phillips screwdriver (M2)
[Required procedure]
Removal of the pedestal cover
1) Turn off the safety switch of the scanner before
replacing the motor.
Part name Interval Part type Part code
1. Motor 10,000 hours
MDBW108885*
i
i. “*” means revision, such as A, B and so on.
ii. The φ92mm Fan is auxiliary use of the φ120mm Fan.
MDBW10885*
i
2. Fan (Scanner Unit)
φ120mm (Radar process Unit)
φ92mm*
ii
(Radar process Unit)
φ60mm (Motor Driver)
φ60mm (Power Supply Unit)
90,000 hours
45,000 hours
45,000 hours
45,000 hours
NZF-1532 NZF-1532
3. LCD PANEL 50,000 hours
CML-1799 CML-1799
4. Fan (Display Unit)
(Radar Process Circuit)
20,000 hours
109R0612S4D13 5BFAB00588
(Power Supply)
20,000 hours
CBP-220 CBP-220
5. Backup battery 5 years
CR2032 5ZBCJ00012
Replacement of motor must be made by specialized service
personnel.
For details, refer to Service Manual.
Turn off th e
safet
y
switch.