JRC JMA-9172-SA - System Alarm Log Display; System Information

8－10
JMA-9172-SA Instruction Manual > 8.COUNTERMEASURE FOR TROUBLE ... > 8.3 PERFORMANCE CHECK
8.3.1.5 System Alarm Log display
Displays previously occurred system alarms with the dates and times when they
occurred.
The current alarm is displayed at the lower right of the radar display. For details,
refer to Section 9.1.1 "List of Alarms and other Indications".
The Alarm log display button (page2-31 Alarm) is clicked, in the same way as
that one.
To erase the alarm logs, press the button in the log display window.
8.3.1.6 System Information
Displays the current system information.
Processor software version information
Scanner software version information
System number
Total transmitting time
→
Total operating time (Total power-on time)
Total operating (power-on) time of the scanner unit
Total operating (power-on) time of the display unit
All Clear
Indicator
TXRX
System No.
TX Time
S-Band
Motor Time
TXRX Total Time
Total Time