JRC JMA-9172-SA - Edit User Map (Edit User Map)

JMA-9172-SA Instruction Manual > 3.BASIC OPERATION > 3.6 DISPLAY USER MAP
3－53
3
2) Specify the mark font size.
3.6.2.4 Setting the character size for comments
Procedures
1) Open the Comment Font Size menu by performing the menu
operation below.
→
→
The Comment Font Size menu will appear.
2) Specify the comment font size.
3.6.3 Edit User Map (Edit User Map)
3.6.3.1 Manually entering the own ship position (Own Ship Position)
Use this function when editing navigation data for a location different from the own ship
position.
Procedures
1) Open the Own Ship Position menu by performing the menu
operation below.
→
The number key screen for entering the latitude/longitude of the Own Ship Position will
appear.
Normal : The mark is displayed in normal size.
Small : The mark is displayed in a size smaller than usual.
Normal : The characters for comments are displayed in normal size.
Small : The characters for comments are displayed in a size smaller
than usual.
U.Map
5. Mark Display Setting
4. Comment Font Size
U.Map
1. Own Ship Position