JRC JMA-9172-SA - Load Operating State (Load User Setting); Delete Operating State (Delete User Setting)

JMA-9172-SA Instruction Manual > 3.BASIC OPERATION > 3.10 USE USER SETTING
3－121
3
3.10.2 Load Operating State (Load User Setting)
The operating state saved in the system can be loaded by performing the operation
below.
When the operating state is loaded, the previous operating state data is discarded.
Therefore, if you do not want to discard the operating state data, save the
operating state by performing the operation described in Section 3.10.1 "Save
Operating State (Save User Setting)".
Procedures
1) Open the Load User Setting menu by performing the menu
operation below.
→
→
→
The Load User Setting menu will appear.
2) Left-click the button for the file to be loaded.
Confirmation Window will appear.
To load the file, left-click the button.
3.10.3 Delete Operating State (Delete User Setting)
The operating state saved in the system can be deleted by performing the
operation below.
Use this function to delete unnecessary operating state data.
Procedures
1) Open the Delete User Setting menu by performing the menu
operation below.
→
→
→
The Delete User Setting menu will appear.
2) Left-click the button for the file to be deleted.
Confirmation Window will appear.
To delete the file, left-click the button.
Main
7. Sub Menu
3. User Setting
1. Load User Setting
1. Yes
Main
7. Sub Menu
3. User Setting
1. Load User Setting
1. Yes