3－110
JMA-9172-SA Instruction Manual > 3.BASIC OPERATION > 3.8 APPLIED OPERATIONS
• Left-click the button located at thelower righit of the display. The
water-temperature graph display function is switched between On and Off.
[2] TEMP Graph Color
• Set the color for the water-temperature graph.
• There are eight selection items:
, , , , , ,
[3] TEMP Range
• When Color is selected for the display color for the water-temperature graph,
set the temperature range of each color.
[4] Time Range
• Set the time range for the water-temperature graph.
3.8.8.6 Course Bar Setting
• The Course Bar Setting menu will appear.
[1] Course Bar Display
• Determine whether to display the bar graph for the course data that has been
received on the radar display.
• One of two digital information areas is used to display data.
: The water-temperature graph is not displayed.
: The water-temperature graph is displayed in digital information area 1.
: The water-temperature graph is displayed in digital information area 2.
: The time range is set at 10 minutes.
: The time range is set at 15 minutes.
: The time range is set at 30 minutes.
: The time range is set at 60 minutes.
: The time range is set at 12 hours.
To Next Page
Loading...
