JRC JMA-9172-SA - Page 30

3.2.8 To get the appropriate image that targets can be easily observed .
3-14
3.3 OPERATION PROCEDURES ..............................................................3-15
3.3.1 Move Cross Cursor Mark by Trackball ........................................3-15
3.3.2 Operate Software Buttons ...........................................................3-16
3.3.3 Basic Menu Operation ..................................................................3-17
3.3.4 Operation on Numeric Value, Latitude / Longitude and Character
Input menu .....................................................................................3-18
3.3.5 Overview of Menu Structure .........................................................3-23
3.4 GENERAL RADAR OPERATION ........................................................3-24
3.4.1 Interference Rejection (IR) ............................................................3-24
3.4.2 Switch Transmitter Pulse Length [GAIN] ....................................3-25
3.4.3 Target Enhance (ENH) ..................................................................3-26
3.4.4 Use Video Processing (PROC) .....................................................3-27
3.4.5 Switch Azimuth Display Mode (AZI MODE) ................................3-28
3.4.6 Switch True/Relative Motion Display Mode (TM/RM) .................3-29
3.4.7 Move Own Ship’s Display Position (Off Center) .........................3-30
3.4.8 Display Radar Trails (Trails) .........................................................3-31
3.4.9 Zoom (x2) .......................................................................................3-34
3.4.10 Hide/Display Range Rings [HL OFF] ...........................................3-35
3.4.11 Hide Graphics Information on Radar Display [DATA OFF] .......3-35
3.4.12 Switch Day/Night Mode [DAY/NIGHT] .........................................3-36
3.4.13 Adjust Operation Panel Brilliance [PANEL] ................................3-36
3.4.14 Set True Bearing ............................................................................3-37
3.4.15 Set Own Ship Speed .....................................................................3-37
3.4.16 Magnet Compass Correction (MAG Compass Setting) .............3-38
3.5 USE OWN SHIP'S TRACK ...................................................................3-40
3.5.1 Display Own Ship's Track (Display Own Track) .........................3-40
3.5.2 Set Display Color of Own Ship's Track (Display Own Track Color) .3-41
3.5.3 Save Own Ship's Track (Own Track Memory) ............................3-42
3.5.4 Cancel Saving of Own Ship's Track (Own Track Memory) ........3-42
3.5.5 Clear Own Ship's Track (Clear Own Track) ................................3-43
3.5.6 Use Expanded Own Ship's Track (Own Track Type) .................3-43
3.5.7 Use Water Depth Track (Water Depth Track) ..............................3-45
3.5.8 Use Water Temperature Track (Water TEMP Track) ..................3-46