3-67
[3] Trails Reduction
･ Make a setting for thinning radar trails.
･ The effect of thinning increases in order of Level1 → Level2 → Level3 .
･ Radar videos do not become obscure because of the thinning of radar trails.
Off : Disables the Trails Reduction function.
Level1 : Enables the Trails Reduction function. (Effect: Low)
Level2 : Enables the Trails Reduction function. (Effect: Modest)
Level3 : Enables the Trails Reduction function. (Effect: High)
[4] Trails Process
･ Determine whether to use the video process with radar signals for plotting radar trails.
･ When Trails Process is On , radar trails are never plotted with unwanted waves, but the radar trails of
moving targets may not be plotted.
･ When Trails Process is Off , radar trails may be plotted with unwanted waves, but the radar trails of
moving targets are always plotted.
Off : Disables the Trails Process function.
On : Enables the Trails Process function.
[5] MAX Interval
･ Select the maximum time for displaying radar trails.
･ Select Short when short radar trails are often used in bays and the likes.
･ Select Long when long radar trails are necessary for ocean navigation.
･ Medium is for specification between Short and Long .
Short : Sets to 15 minutes as the maximum time for radar trails display.
Medium : Sets to 30 minutes as the maximum time for radar trails display.
Long : Sets to 60 minutes as the maximum time for radar trails display.
To Next Page
Loading...
Need help?
General
