11-12
11
Specifications
Note: The Speed measuring accuracy of speed sensor shall confirm to IMO Resolution
MSC.96(72).
The measuring accuracy of GPS shall confirm to IMO Resolution MSC.112(73).
5) Water temperature, 6) Current and 7) Direction of wind, velocity of wind in the
above item: (36) Receivable Signal are applied since the Display Unit software:
Ver. 2.00.
(37) Sendable Signal
1) Slave video Radar video: TIY, VD, BP(2048p), BZ
2) Navigation Information Radar system data: RSD
IEC61162-1/2 Own ship data: OSD
Tracking target data: TTM, TLL, TTD, TLB, JRC-ARPA
AIS target data: TTM, TLL, TTD, TLB
Alarm: ALR
3) External alarm Default setting: normally close contact
Maximum current: 200mA
(SYSALM, ARPAALM, PWRALM)
4) Acknowledge Contact output
5) Watchman reset Contact output
6) Remote maintenance JRC format
7) AIS alarm acknowledge ACK
8) External monitor Multi scan monitor, Analog RGB, HD15pin
NWP-46(Maximum length of the cable: 10m)
To Next Page
Loading...
Need help?
General
