JTECH Medical COMMANDER ECHO - Using the Commander Echo Console; Operating the Console Control Stick; Main Menu; Viewing and Changing Testing Defaults

© 2017 JTECH Medical MN022_M
12
Using The Commander Echo Console
Operang the Console Control Sck
The Commander Echo Console is ed with a Control Sck, which allows you to turn the Console on and o,
navigate through the menus, and make your selecons. Refer to the following list in order to operate the
Control Sck:
• Press the Control Sck to turn on the Commander Echo Console.
• From the main screen, hold the Control Sck to turn o the Commander Echo Console.
• With the Commander Echo Console turned on, pressing the Control Sck will select the highlighted menu
opon.
• Move the Control Sck up or down to navigate the menus and tests.
• When in the sengs menu, move the Control Sck le or right to adjust test defaults.
• Hold the Control Sck to the le to return to the previous menu (Note: This funcon does not work while
in the Seng Menu, changing the test sengs, or when reviewing specic test informaon. Please select
the “Exit” opon from the menu in order to leave these screens).
Main Menu
When the Commander Echo Console is powered on, the main menu will always be the starng screen. From
the main menu, you can select the following opons:
Test - Select this opon to begin performing tests.
Review - Select this opon to review any completed test data, or delete specic tests.
Sengs - Select this opon to set test defaults, see instrument info, or delete all test data.
Viewing And Changing Testing Defaults
The Commander Echo system allows for up to seven (7) dierent instrument types to be used with the same
Console. The Commander Echo Console has several global sengs, which will change the defaults for all of the
instruments. Other sengs are instrument specic, and will be changed only when accessed via the specic
instrument’s menu.
Global System Settings
Wt. Units - Record and display in either Pounds (lb), Kilograms (kg), or Newtons (N).
Tests - Choose from 1-20 tests per exam.
System menu- View Instrument Info, Delete All Exam Data, or Turn the Sound On/O.
Scan - Used to scan the RF channels and automacally set the best one.
Register - Used to register new devices to the Console.